Jenn-Air W10526082A Installation Instructions Manual page 13

9. Position blower motor in cabinet opening and mount blower
motor to the floor.
Option 1
B
A
A. Inlet from range
B. Exhaust outlet
10. Connect vent system to blower motor outlet (option 1 shown)
with 4 - #8 x ¾" hex head screws provided.
A
B
C
A. Inlet
B. Vent clamp
11. Go to the "Make Gas Connection" section.
Top View
Option 2
A
D
C. Floor
D. Vent system
Left Side Venting
1. Mark cabinet side for left side vent hole location.
2. Mark and cut a 5½" (13.9 cm) diameter hole in the cabinet
side.
B
3. Mark and cut a 14" x 11" (35.6 x 27.9 cm) opening in the floor
of the cabinet.
A
A. 11" (27.9 cm) from front of cabinet
B. 14" (35.6 cm) from left side of cabinet
A
B
A. 31 " (79.2 cm) from top of cabinet
B. 18" (45.7 cm) from back wall
A
B
A. 5½" (13.9 cm) diameter hole
Top View
B
13