Jenn-Air W10526082A Installation Instructions Manual page 12

NOTE: If the template is misplaced, the following
measurements can be used to determine the vent hole
location.
A
A. 9" (22.8 cm)
B. 3 " (7.9 cm)
C. 8 " (21.3 cm)
D. 6 " (16.2 cm)
E. 2¼" (5.7 cm)
4. Draw and cut a 6¼" (15.8 cm) diameter hole.
A. Option 1
B. Option 2
5. Remove the 4 locknuts on the blower side of the motor and
remove the bracket.
View from Motor Side of Blower
A. Electrical connector
12
Top View
B
C
D
E
F
G
I
H
F. 12½" (31.7 cm)
G. 18¾" (47.6 cm)
H. 1½" (3.8 cm)
I. 3½" (8.9 cm)
B
A
A
6. Lift and rotate the motor 90° to reposition the electrical
connection.
A. Electrical connector
7. Rotate bracket 90° and secure with 4 locknuts.
8. Remove the bracket from the other side of the blower motor,
rotate 90° and secure with 4 locknuts.
A