View The Firmware Version; Upgrading The Firmware; Automating Firmware Upgrades - Mitel 5330 Sip User And Administrator Manual

View the Firmware Version

To view the firmware version using the Web Configuration Tool:
• Access the Home Page of the Web Configuration Tool and click Firmware Updates.
To view the firmware version using the Settings Key:
1. Press Settings
2. Press the Line 2 key. Main firmware version appears on the top line and boot firmware
version appears on the second line of the information area.
3. Press Settings

Upgrading the Firmware

To upgrade the firmware using the Web Configuration Tool:
• Access the Configuring Network Settings and Updating Firmware sections of the
Administrator's Web Configuration Tool.
To upgrade the phone's firmware using the Settings Key:
1. Press Settings
2. Press OK, and then press Next until UPGRADE FIRMWARE? appears.
3. Press OK. CHOOSE PROTOCOL appears.
4. Press the desired protocol (HTTP or TFTP), or press AUTO for automatic upgrades.
BEGIN UPGRADE NOW? appears.
5. Press Confirm. The downloading process begins and the phone reboots. This process
may take approximately 1 to 2 minutes. When the time and date appear on the display,
the download and reboot are complete and the phone is ready to use.
To upgrade the firmware from the boot program:
• Access the Administrator Tools > Configuring Network Settings section in the
Administrator's Web Configuration Tool Online Help (see page 7).
CAUTION: DO NOT remove power from the phone while firmware is downloading or
the phone is rebooting. This may result in severe damage to your phone.
Troubleshooting Tip: If your phone displays "SIP MAIN NOT FOUND", it is likely that your
system has experienced a power failure. The SIP Phone Boot firmware "borrows" Flash sectors
from the SIP Main area during firmware installation. At the end of a normal installation, the
sectors are restored without affecting SIP Main. However, if power is removed during Boot
installation, then SIP Main is erased and will have to be reinstalled on the phone.

Automating Firmware Upgrades

You can configure phones to poll the server for new versions of firmware. When the phone
detects a firmware upgrade, it downloads the new version and stores it in memory. When it is
next idle, the phone reboots with the new firmware.
To automate firmware upgrades, your Administrator can set a Firmware Upgrade option and a
polling interval on the Firmware Update page of the Web Configuration Tool. For programming
options, refer to the online help supplied with the Web Configuration Tool.
5330/5340 IP Phone SIP User and Administrator Guide
.
to return to the default display.
, and then press >> until Features? appears.
30