Shared Line Programming Requirements; Programming Shared Line Keys; Line Key Status; Time And Date - Mitel 5330 Sip User And Administrator Manual

corresponding line button will change the state of that call and get connected to the callin
party. An exception to this scenario occurs when the server is configured to allow line seizure by
multiple lines. Mitel SIP phones support multi-call server programming.
Requirements for making calls and picking up held calls from shared lines are the same as for
normal (non-shared) lines.

Shared Line Programming Requirements:

•
Your Administrator must create a user
Configuration tool) for the user with whom you want to share a line.
•
Your Administrator must configure the type of shared line (SIP, BLA,
Type field on the User List Config page.
•
Your Administrator must enable SIP Enha
before SIP_BLA and SIP_SCA modes can be configured.

Programming Shared Line Keys

1. Access the Key Programm
2. Click the Key Number of the key you want to assign as a shared line
3. From the Feature list, select Shared Line.
4. From the Context list, select the User ID wit
5. Enter a label/description for this key (optional).
6. Click Apply to apply the changes.

Line Key Status

Shared lines displa y the following indicator lamps:
Line Status LED Appearance
Trying Solid Red
Active Solid Green
Held Flashing Red
Alerting Flashing Green

Time and Date

A Simple Network Time Protocol (SNTP) server (version 4 or later) provides your phone with the
date and time. Your Administrator configures your time zone once using the Web Configuration
Tool. If Daylight Savings Time is configured, your phone automatically adjusts to DST.
If an SNTP server is not available in your system setup, you can modify the time and date using
your phone or the Date/Time page of the Web Configuration Tool (see Accessing the Web
Configuration Tool on page 9). For more information, contact your Administrator.
Notes:
•
Y ou cannot change your time and date settings while on a call.
•
If your phone loses power, the modified time and date are not sa
5330/5340 IP Phone SIP User and Administrator Guide
entry (on the User List Config page of the Web
nced mode (on the Advanced Features page)
ing page of the Web Configuration Tool.
h which to associate this key.
Descriptio n
When a user initiates a call on a shared line, the LED of
that line and the LEDs of all shared lines glow red.
When a call has been successfully connected, the L
of that line and the LEDs of all shared lines glow green.
When a user puts another party on hold, the LED of that
line and the LEDs of all shared lines flash red.
When a call is incoming, the LED of the called l
the LEDs of all shared lines flash green.
g/held
or SCA) in the Line
.
ED
ine and
ved.
25