Table of Contents
Advertisement
AUTO SET UP
Make sure an aerial lead is connected from your household aerial (page 7).
You must follow the instructions on this page carefully.
Your unit will not function properly until Auto Set Up has been completed.
What is Auto Setup
• The AUTO SET UP feature makes installing your
unit easy. It automatically searches and tunes all
available TV Stations and stores them in your unit,
it then sets the correct time and date.
• During a power failure or disconnection of the
mains lead, the clock and all its programmed
setting will remain in the memory for 30 minutes. If
the power failure is longer than 30 minutes you will
have to reset the present time.
2
Press MAIN POWER switch on the unit. The
STANDBY (
) indicator on the unit lights.
NOTES: • To re-start AUTO SET UP, press and hold CHANNEL
than a few seconds.
• Once you conduct AUTO SET UP, the previous settings will be cancelled.
10
Make sure an aerial lead is connected from your
household aerial or cable box (if you subscribe to
a cable service).
Plug your unit into a mains socket.
Press ON (
) button on the unit. The
STANDBY (
)indicator on the unit turns off.
"AUTO TUNING" appears on the screen. Your
unit is now automatically tuning in all available TV
stations and setting the correct time and date. If
the desired TV stations could not be preset, set
the channels manually. See page 12. If the clock
could not be set, set the clock manually. See
page 11.
and
buttons on the unit together for more
AUTO TUNING
Advertisement
Table of Contents
