Connections To Other Equipment - Toshiba VTW2185 User Manual

CONNECTIONS TO OTHER EQUIPMENT

The exact arrangement you use to interconnect various video and audio components to the unit is dependent on the model
and features of each component. Check the Owner's Manual provided with each component for the location of video and
audio inputs and outputs.
Using an Audio Amplifier
Rear of unit
Audio (L) Output
Audio (R) Output
Using an AV Amplifier with built-in digital surround
If you are using an Amplifier with a built-in digital surround sound decoder (such as Dolby Digital / DTS / MPEG / etc.),
you can connect it as shown below.
Rear of unit
Coaxial Digital Audio Output
Coaxial digital cable (not supplied)
To Coaxial Digital Audio Input
AV Amplifier with built-in digital
surround decoder as listed above
*
Manufactured under license from Dolby Laboratories. "Dolby" and the double-D symbol are trademarks of Dolby
Laboratories. Confidential unpublished works. © 1992-1997 Dolby Laboratories, Inc.. All rights reserved.
*
DTS and DTS Digital Out are trademarks of Digital Theatre Systems, Inc.
NOTE:
When you make the connections above, make sure that the power of all units is switched off at the mains.
•
Some DTS decoders which do not support DVD-DTS interface may not work properly with the unit.
•
When playing DTS encoded material, the sound will only be available through the Digital Audio Output Socket.
•
8
Amplifier
To Audio (R) Input
AUDIO cord (not supplied)
Front
Speaker
(Left)
To Audio (L) Input
Subwoofer
This unit
Center Speaker
Surround
Speaker (Left)
Front
Speaker
(Right)
Surround
Speaker (Right)