Table of Contents
Advertisement
Selecting the audio languages/
Selecting the digital output
To select the audio languages
signal, you can select one of the audio language.
1
Press MENU in the TV mode, then press
or
to display the "AUDIO" menu.
2
Press
or
to select "AUDIO LANGUAGE",
then press .
3
Press
or
to select your desired language.
4
Press EXIT/CANCEL to clear the menu screen.
Note:
Audio language feature is not available for analog channel.
Basic playback
Playing a disc
This section shows you the basics on how to play a disc.
CAUTION
Keep your fi ngers well clear of the disc slot when disc is
loading or unloading. Neglecting to do so may cause serious
personal injury.
DVD
Basic playback
VCD
CD
Preparations:
• When connecting to other equipment, turn the power off.
1
Press POWER on the unit or on the remote control
to turn on the unit.
The Power indicator on the front of the main unit will light.
• Every time you press POWER, the TV/DVD starts
from TV mode.
• When using an amplifi er, switch on the amplifi er.
2
Press TV/DVD on the remote control to select DVD
mode.
The DVD startup screen will appear on the TV screen.
3
Load a disc in the disc slot.
Load the disc in the disc slot with the label side facing
forward. (If the disc has a label.) Hold the disc without
touching either of its surfaces, align it with the guides,
and place it in position.
38
/ / /
EXIT/CANCEL
MENU
To select the digital output
you connect a Dolby Digital decoder or other digital audio
system to the coaxial digital audio output on the TV.
1
Press MENU in the TV mode, then press
or
to display the "AUDIO" menu.
2
Press
or
to select "DIGITAL OUTPUT".
3
Press
or
to select "PCM" or "DOLBY
DIGITAL".
4
Press EXIT/CANCEL to clear the menu screen.
Notes:
•
Digital output feature is available for only digital channel.
•
Digital audio output is effective for only digital source (digital
channel or DVD playback).
TV/DVD
POWER
EJECT
PLAY
STOP
VOL
+ /–
ENTER
VOLUME + /–
/ / /
PLAY
POWER
STOP
4
On the TV screen, " " changes to "Reading" and
then playback commences.
Reading
A menu screen will appear on the TV screen if the
disc has a menu feature.
Press
/
or
/
on the remote control
to
select title, then press ENTER. Title is selected and
play commences.
5
Press VOLUME + or – to adjust the volume.
6
Press STOP to end playback.
Resuming facility
• The unit records the stopped
point, depending on the disc.
"
" appears on the screen.
Press PLAY to resume playback
(from the scene point).
• If you press STOP again
(" " appears on the TV screen.),
the unit will clear the stopped
point.
To start playback in the stop mode
Press PLAY.
Note:
If the unit does not operate properly:
Static electricity, etc., may affect the TV/DVD's operation. In such
case, disconnect the AC cord, then connect it again.
Checking the signal meter/
Using the auto shut off feature
To check the signal meter
You can check the strength of the digital signal by viewing the
digital signal meter.
1
Press MENU in the TV mode, then press
or
to display the "SETUP" menu.
2
Press
or
to highlight "SIGNAL METER".
3
Press
or
to check the digital signal strength.
4
Press EXIT/CANCEL to return to the normal
screen.
Notes:
•
Signal meter feature is not available for analog channels.
•
After approximately 4 minutes, SIGNAL METER screen will
return to normal TV-opreation automatically.
•
When you select a vacant channel, the signal meter may react.
To obtain a higher quality picture
Occasionally, some picture noise may appear on the TV screen while playing a
DVD video disc because the high resolution pictures on these discs include a lot
of information. In such case, you may reduce the SHARPNESS with the Picture
control adjustment menu (see page 33).
About
DVD
VCD
CD
The
icons on the heading bar show the playable discs for the
DVD
VCD
CD
function described under that heading.
: You can use this function with DVD video discs.
: You can use this function with Video CDs.
VCD
: You can use this function with Audio CDs and CD-R/RW CDs.
CD
DVD
Basic playback
VCD
CD
To pause playback (still mode)
Press PAUSE during playback.
To resume normal playback,
press PLAY.
• The sound is muted during still
mode.
To stop playback
Press STOP.
Notes:
•
If a non-compatible disc is loaded, "Incorrect Disc", "Region Code Error" or "Parental Error" will appear on the TV screen
according to the type of loaded disc. In this case, check your disc again (see pages 7 and 58).
•
Some discs may take a minute or so to start playback.
•
When you set a single-faced disc label downwards (ie. the wrong way up), "Reading" will appear on the display for a few
minutes and then "Incorrect Disc" will continue to be displayed.
•
Some discs may not work the resuming facility.
•
Resuming cannot function when you play a PBC-featured Video CD while the PBC is on. To turn off the PBC, see page 47.
•
Some playback operations of DVDs may be intentionally fi xed by software producers. Since this unit plays DVDs according
to the disc contents the software producers designed, some playback features may not be available. Also refer to the
instructions supplied with the DVDs.
•
Do not move the unit during playback. Doing so may damage the disc.
•
Use the EJECT button to unload and eject the disc.
•
Do not put any objects other than discs on the disc slot. Doing so may cause the unit to malfunctions.
•
There may be a slight delay between the button is pressed and the function activates.
/ / /
EXIT/CANCEL
MENU
To use the auto shut off feature
In case of "AUTO SHUT OFF" is "ON", if a station being
viewed stops broadcasting, the TV will automatically shut itself
off after 15 minutes.
1
Press MENU in the TV mode, then press
or
to display the "SETUP" menu.
2
Press
or
to highlight "AUTO SHUT OFF".
3
Press
or
to highlight "ON".
4
Press EXIT/CANCEL to return to the normal
screen.
37
EJECT
PLAY
STOP
PAUSE
To remove the disc
Press EJECT.
Remove the disc after the disc comes
out.
39
Advertisement
Table of Contents
Troubleshooting
