Mesurement Lock And Measurement Lock Off - Sekonic L-608 Operating Manual

3. Before Using
8. Mode and Setting Lock or Lock Off
1. Hold down the Mode set button !0 and ISO1 button !1
and "LOC" will appear to indicate that the Settings are
locked. The last measurement is held until the lock is
released, even if the Jog wheel t is accidentally
moved.
However, if the measurement button ! 5 is pressed, a
new measurement is displayed with the same locked
settings.
2. To release the Measurement lock, perform the same
operation for the Measurement lock, Hold down the
Mode set button and ISO1 button and "Off" will appear
to indicate that the Measurement lock is released.
Reference:
• If power to the meter is turned off or auto off is activated when in the locked position, the dial
lock function will continue operating when the meter is turned on again.
-6-
ISO 1
MODE
ISO 1
MODE