Sekonic L-608 Operating Manual page 40

6. Advanced Functions
11. Wireless Flash radio triggering
With the radio transmitter module plugged into the meters radio socket and a receiver (RR-4 or RR-
32 sold separately, or PocketWizard® products) connected to one or more electronic flash units, the
meter provides a convenient system that enables one person working alone to measure flash output
without the need of a sync cord. Pressing the Measuring button simultaneously triggers the flash
and measures the light.
The L-608/608 CINE has 32 triggering channels when the radio triggering module (RT-32) is plugged
into the radio socket. Channels 1-16 provide single triggering, while channels 17-32 offer selective
quad-triggering capability. Selecting one of channels (17-32) provides control of up to four additional
sub-channels (A, B, C and D). Selecting or deselecting of zone lighting is possible with sub-channels.
In order to trigger flash units set for sub-channels, the electronic flash unit must be connected to the
RR-32 receiver or PlcketWizard MAX or MultiMax. With the RR-4 receiver or PocketWizard Plus
triggering channels 1-4 can be selected.
< Example with optional 32 channels receiver >
Open battery compartment cover !6 , remove
1.
connector cover and set the RT-32 radio transmitter
module (optional) by aligning the connector with the
pins.
CAUTION
• To prevent damage due to static electricity, release static electricity stored in your body
by touching a metal object nearby (door knob, aluminum window frame, etc.) before
touching the radio transmitter module.
2. Switch to the Wireless flash radio triggering setting
mode by using Jog wheel t while pressing mode
set button !0
-36-
.
RT-32 radio transmitter
module
MODE