Before You Play; Opening/Closing The Lid; Turning The Power On/Off - Roland RP301R Owner's Manual

& &

Before You Play

Opening/closing the lid

First, open the lid. You must use both hands to open or close the lid.
Opening the Lid
1.
Use both hands to lift the edge of the lid, and push it away
from yourself.
Closing the Lid
1.
Grasp and gently lower the edge of the lid with both
hands.
Note!
• When opening and closing the lid, be careful not to let your
fi ngers get caught. If small children will be using the piano, adult
supervision should be provided.
• If you need to move the piano, make sure the lid is closed fi rst to
prevent accidents.
8

Turning the power on/off

Turning the power on
1.
Edge of lid
2.
3.
Turning the power off
1.
2.
If you don't want the power to turn off
automatically, turn the "Auto Off " setting off !
Once the connections have been completed (p. 38), turn on power to
your various devices in the order specifi ed. By turning on devices
in the wrong order, you risk causing malfunction and/or damage to
speakers and other devices.
Turn the [Volume] knob all the way toward the left to
minimize the volume.
Turn the [Power] switch ON.
On
Off
After a brief interval, you'll be able to produce sounds by playing
the keyboard.
Use the [Volume] knob to adjust the volume.
* The RP301R is equipped with a protection circuit. A brief interval
(a few seconds) after power up is required before the RP301R
will operate normally.
* Before switching the power on/off , always be sure to turn the
volume down. Even with the volume turned down, you might
hear some sound when switching the power on/off . However,
this is normal and does not indicate a malfunction.
Turn the [Volume] knob all the way toward the left to
minimize the volume.
Turn the [Power] switch OFF.
With the factory settings, the unit's power will automati-
cally be switched off 30 minutes after you stop playing or
operating the unit.
If the unit's power has been turned off automatically, you can
use the [Power] switch to turn the unit back on again.
If you don't want the power to turn off automatically, change
the "Auto Off " setting to "OFF" as described on "Making the
power automatically turn off after a time (Auto Off )" (p. 27).