Page 2
1. Introduction This manual aims to help you get the latest software programs for Roland RP30 Digital Piano. The update process includes two major steps: 1. Install the update tool to your PC. 2. Update RP30 with the tool. 2. Install the Update Tool Preparation ⚫...
3. Firmware Update Preparation ⚫ Connect RP30 to a PC with a standard USB cable. Note: Never connect the PC with more than one instrument for each update process. ⚫ Make sure the power supply is reliable for the update.
Page 10
Double click the Firmware update icon on desktop. ⚫ The Firmware Update window will pop up. Make sure you get the message below before proceeding. Note: If you fail to get the above message, please try again: ⚫ Check the USB connection or try with another USB cable. ⚫...
Page 11
Open the update file The pictures below shows the update progress of RP30. ⚫ Open the update file “xxx.DAT”. ⚫ Check the product model and software version. Now the update is ready. 11 / 13...
Page 12
Click “↓Update” to start. Note: Do not disconnect the power supply or turn off RP30 during the update! Note: The progress bar may repeat several times before the update is finished. Note: The required time for update is around 25minutes.
Page 13
Click “OK” to finish the update process if you get the message “Update successful”. The update is completed now. Note: ⚫ Close the update tool and restart RP30, it will operate with the latest programs. ⚫ If you need to update another RP30, please repeat step 3.1 - step 3.6. ⚫...