Restoring The Settings To The Factory Condition (Factory) - Roland RP301R Owner's Manual

& & Restoring the settings to the factory condition ( Factory)
The settings you've changed in Function mode can be restored to
their factory-set condition. This operation is called "Factory".
Note!
The "Factory" operation will erase all settings stored by the
Memory Backup function.
28
1.
While holding down the [Split] and [Transpose] buttons,
turn on the power.
Factory?
N Y
If you decide not to execute the Factory Reset operation, press the
[–] button.
2.
Press the [+] button to select "Y".
When the Factory Reset has been completed, the display will
indicate "End. "
* Never turn off the power before the display indicates "End. "
3.
Press the [Power] switch to turn the power off , then on
again.