Safety Cut-Out - Zanussi ZKT 652 DBV Installation And Operating Instructions Manual

Safety cut-out

Cooking surface
• If after switching on the cooking surface, a heat
setting is not set for a cooking zone within approx.
10 seconds, the cooking surface automatically
switches itself off.
• If all cooking zones are switched off, the cooking
surface automatically switches itself off after ap-
prox. 10 seconds.
Control panel
3
Moisture (e.g. a wet cloth) or liquid boiling over
onto the control panel immediately switches
all cooking zones off.
Induction cooking zones
• In the event of overheating (e.g. when a pan boils
dry) the cooking zone automatically switches itself
off. is displayed. Before being used again, the
cooking zone must be set to 0 and allowed to cool
down.
• If cookware that is not suitable is used,
in the display and after 2 minutes the display for
the cooking zone switches itself off.
• If one of the cooking zones is not switched off after
a certain time, or if the heat setting is not modified,
the relevant cooking zone switches off automati-
cally. is displayed. Before being used again, the
cooking zone must be set to 0.
Heat setting
V, 1 - 2
3 - 4
5
6 - 9
32
flashes
Switches off after
6 hours
5 hours
4 hours
1.5 hours