Setting the recording scene
[Rec Scene]
The recording setting can be selected from
the [Dictation], [Conference], [Lecture]
templates to suit the recording scene or
situation. You can also save a recording
setting of your choice.
1 Select [Rec Scene] from the menu
on the [Rec Menu].
• For details on how to enter the menu
settings, please see "Menu setting
3
method" (☞ P.65).
2 Select [Scene Select] or [Scene
Save].
When [Scene Select] is selected:
1 Press the + or – button to select the
recording scene you want to set.
2 Press the `OK button to complete
the selection.
Template for Setting a Recording scene
In [Scene Select], you can select a recording scene that is most suitable for the recording
scene or situation from three templates. The recording settings for the respective recording
scenes are as follows.
Record Setting
[Mic Sense]
[Rec Mode]
[Rec Level]
[Zoom Mic]
[Low Cut Filter]
EN
[VCVA]
80
[Standby]
When [Scene Save] is selected:
3 Press the F (HOME) button to
Recording Scene
Off
Dictation
Middle
Low
ST XQ
HQ
Auto
Auto
Off
Off
Off
On
Off
Off
Off
Off
Menu setting method
• To confirm the respective recording
scene settings, press the + or – button
in the [Scene Select] display to select
the item you want to confirm, then
press the 9 button to confirm in
the setting confirmation display. To
end the setting confirmation display,
press the 0 button and the display
will return to the [Scene Select]
display.
Besides the [Rec Scene] templates found
in the recorder, you can also save the menu
settings of a recording you have set to
your choice.
[Scene Save] cannot be used during
recording. While the recorder is paused,
enter the menu from the [Home] menu
display, and then perform this setting.
1 Press the + or – button to select the
[User Setting] you want to save.
2 Press the `OK button to complete
the settings.
complete the setting.
Conference
Middle
ST XQ
Auto
Wide
On
Off
Off
Lecture
High
ST XQ
Auto
Zoom
On
Off
Off