Setting An Index Mark; Clearing An Index Mark - Olympus DM-5 Detailed Instructions

Setting an index mark

If index marks are placed, you can quickly
find a location you want to listen to in fast
forward and fast rewind and when cuing
a file.
This operation can be performed
when the [INDEX] function has
been assigned to a Fn button (F1
or F) (☞ P.76).
1 Press the Fn (INDEX) button during
file recording, recording pause,
playing, or playback pause.
• A number and recording position
appears on the display and an index
mark will be placed.
• Even after an index mark is placed,
recording or playback will continue
so you can place index marks in other
locations in a similar manner.

Clearing an index mark

This operation can be performed
when the [Erase] function has been
assigned to a Fn button (F1 or F)
(☞ P.76).
1 Locate the index mark you want
to clear.
2 Press the 9 or 0 button to
select the index mark to erase.
3 While the index number is
displayed (approximately 2
seconds), press the Fn (ERASE)
button.
• The index mark is erased.
• Index numbers after the erased index
number will automatically move up.
Notes
• Up to 16 index marks can be set in a file. If
you try to place more than 16 index marks,
the [Index Full] message will appear for
index marks.
• Index marks cannot be set or erased in a
locked file (☞ P.75).
Playback
2
EN
51