Troubleshooting - Olympus DM-5 Detailed Instructions

Message
[Please Select The
File]
[Same folder. Can't be
moved(copied).]
[Same files. Can't be
moved(copied).]
[This file can't be
divided.]

Troubleshooting

Symptom
Nothing appears on
the display
Won't start
8
Unable to record
No playback tone
heard
Recording level too
low
EN
168
Alarm message list/Troubleshooting
Meaning
Unselected File
File cannot be moved
(copied).
File cannot be moved
(copied).
File which cannot be split.
Probable cause
The battery is not loaded properly.
Battery power is getting low.
The power is off.
Battery power is getting low.
The power is off.
The recorder is in HOLD mode.
Low remaining memory.
The maximum number of files has
been reached.
The earphone is connected.
The volume level is set to [00].
The recording level has not been
adjusted.
The microphone sensitivity is too low.
This could potentially be because
the output level for the connected
external devices are too low.
Explanation
File is not selected.
Attempting to move (copy)
into the same folder.
File in the destination
with the same name, or
file with DRM.
Attempting to split a file
besides the PCM files
recorded in this recorder.
Action
Check the direction of the battery.
(☞ P.21).
Charge the battery (☞ P.21 to P.25).
Turn the power on (☞ P.26).
Replace with new battery (☞ P.21 to P.25).
Turn the power on (☞ P.26).
Release the recorder from HOLD (☞ P.27).
Erase unnecessary files (☞ P.60).
Change to the another folder
(☞ P.32, P.38).
Unplug the earphones to use the
internal speaker.
Adjust the volume level (☞ P.46).
Adjust the recording level and then try
recording once more (☞ P.67).
Set the microphone sensitivity to [High]
or [Middle] mode and try again (☞ P.67).
Adjust the output level for the
connected devices.
Action
Please select a file then
carry out the operation
(☞ P.53 to P.59).
Please select another
folder.
Please select another file.
Please select another file.