Operation
EMU27820
Stopping engine
Before stopping the engine, first let it cool off
for a few minutes at idle or low speed. Stop-
ping the engine immediately after operating
at high speed is not recommended.
EMU27844
Procedure
1.
Push and hold the engine stop button or
turn the main switch to "
33
2.
" (off).
3.
ZMU04399
4.
NOTE:
The engine can also be stopped by pulling
ZMU04398
the lanyard and removing the lock plate from
After stopping the engine, disconnect
the fuel line if there is a fuel joint on the
outboard motor.
Tighten the air vent screw on the fuel
tank cap (if equipped).
Remove the key if the boat will be left
unattended.
ZMU04400
ZMU02041