Stopping Engine; Procedure - Yamaha E60H Owner's Manual

Operation
you to lose control, be ejected, or im-
pact the steering wheel or other parts of
the boat. This could increase the risk of
serious injury. It could also damage the
shift mechanism.
Do not shift into reverse while traveling

at planing speeds. Loss of control, boat
swamping, or damage to the boat could
occur.
The boat is not equipped with a separate
braking system. Water resistance stops it af-
ter the throttle lever is moved back to idle.
The stopping distance varies depending on
gross weight, water surface conditions, and
wind direction.
EMU27822

Stopping engine

Before stopping the engine, first let it cool off
for a few minutes at idle or low speed. Stop-
ping the engine immediately after operating
at high speed is not recommended.
EMU2784A

Procedure

(1) Push and hold the engine stop button or
turn the main switch to "
48
(2) After stopping the engine, disconnect
" (off).
(3) Tighten the air vent screw on the fuel
ZMU03209
OFF
OFF
the fuel line if there is a fuel joint on the
outboard motor.
tank cap (if equipped).
ON
ZMU01779
ZMU03210
ZMU03211