Table of Contents
Advertisement
To shift from in gear (forward/reverse) to neu-
tral
1.
Close the throttle so that the engine
slows to idle speed.
2.
After the engine is at idle speed in gear,
move the remote control lever firmly and
crisply to the neutral position.
N
ZMU04588
EMU31742
Stopping boat
EWM01510
WARNING
Do not use the reverse function to slow
G
down or stop the boat as it could cause
you to lose control, be ejected, or impact
the steering wheel or other parts of the
boat. This could increase the risk of se-
rious injury. It could also damage the
shift mechanism.
Do not shift into reverse while traveling
G
at planing speeds. Loss of control, boat
swamping, or damage to the boat could
occur.
The boat is not equipped with a separate
braking system. Water resistance stops it af-
ter the throttle lever is moved back to idle. The
stopping distance varies depending on gross
weight, water surface conditions, and wind di-
rection.
EMU27821
Stopping engine
Before stopping the engine, first let it cool off
for a few minutes at idle or low speed. Stop-
ping the engine immediately after operating at
high speed is not recommended.
EMU31831
Procedure
1.
Turn the main switch to "
OFF
Operation
" (off).
ON
START
ZMU04599
45
Advertisement
Table of Contents
