Table of Contents
Advertisement
Basic components
EMU26270
Shallow water lever
Lifting this lever will tilt the motor up partially
to provide more clearance when operating in
shallow water.
EMU26312
Tilt lock mechanism
The tilt lock mechanism is used to prevent
the outboard motor from lifting out of the wa-
ter when in reverse gear.
1. Tilt lock lever
19
To lock it, set the tilt lock lever in the "
(lock) position. To release, push the tilt lock
lever in the " " (release) position.
EMU26350
Tilt support lever for manual tilt
model
To keep the outboard motor in the tilted up
position, lock the tilt support lever to the
swivel bracket.
ZMU04371
EMU26372
Top cowling lock lever(s) (turn type)
To remove the engine top cowling, turn the
lock lever(s) and lift off the cowling. When in-
stalling the cowling, check to be sure it fits
ZMU04372
properly in the rubber seal. Then lock the
cowling again by returning the lever(s) to the
lock position.
1
1. Top cowling lock lever(s)
ZMU04373
"
ZMU04374
1
ZMU04375
Advertisement
Table of Contents
