the engine is in neutral and that the en-
gine stop switch lanyard lock plate is at-
tached to the engine stop switch. The
main switch must be "
equipped.
OFF
NOTE:
See page 66 for cold engine starting proce-
dures.
5.
Insert the knotted end of the emergency
starter rope into the notch in the flywheel
" (on), if
ZMU04445
ZMU02334
ON START
ZMU01906
Trouble Recovery
rotor and wind the rope several turns
around the flywheel clockwise.
6.
Pull the rope slowly until resistance is
felt.
7.
Give a strong pull straight out to crank
and start the engine. Repeat if neces-
sary.
EMU29670
Engine fails to operate
EMU29711
Cold engine fails to start
1.
Place the gear shift lever or remote con-
trol lever in neutral.
ZMU04430
N
ZMU04446
66