Installation Of The Printer In A Wireless Network (Wi-Fi) - Olivetti SIMPLE_WAY User Manual

INSTALLATION OF THE PRINTER IN A WIRELESS NETWORK (WI-FI)

Prerequisites
For initial installation or configuration of the printer, the following are required:
• A USB cable (not included in the packaging)
• A desktop or portable computer with active wireless device
• In the case of installation in infrastructure mode, an operating and functioning wireless network.
note: If you have just bought a portable or a desktop computer, consult the user guide provided to
activate and configure the wireless network settings.
Installation
For correct installation of the printer in Wi-Fi mode:
• Carry out USB installation
• Activate the Wi-Fi component of the printer
To enable wireless communication from the computer, use the software of the printer (Toolbox
application) selecting Ad-Hoc mode (peer to peer) or Infrastructure (with point of access)
• Create the network connection between the computer and the printer
• Perform Wi-Fi installation
To add the printer to the list of printers available in the system.
USB and Wi-Fi installation are carried out using the same "Installation" CD-Rom provided with the
printer; on completion, it will be possible to use the connection via USB cable and Wi-Fi mode.
For further information, consult the "Wifi Info" guide.
12 CHAPTER 1