Copying/Scanning Problems; Meaning Of Leds On The Front Panel - Olivetti SIMPLE_WAY User Manual

Problem
Horizontal streaks are printed.
The printed characters are not
properly defined.

Copying/Scanning Problems

Problem
The printer or scanner makes
unusual noises during operation.
Horizontal streaks are printed.
A completely black copy is
output.

Meaning of LEDs on the front panel

The power-on button, which is used to switch the printer ON and OFF, may also flash to indicate printer
status:
• If this flashes during printing, this indicates sending or reception of data by the computer
• If this flashes and a flashing "E" is shown on the LCD display, this indicates an error condition.
Possible causes of error are listed below and may be displayed in detail using the "Status Monitor"
application available on the status bar or in the list of programs in the Olivetti folder.
Problem
A flashing "E" is shown on the
LCD display which indicates the
number of copies
Possible Cause
• The ink cartridges are dirty.
• The ink cartridges are no
longer aligned.
Possible Cause
• The ink cartridges are dirty.
• Faulty Contact Image Sensor.
Possible Cause
• A print or copy operation has
been started but the paper in
the printer has run out.
• The format of the paper
loaded does not match the
format selected by the
Toolbox application or by the
PictBridge compatible digital
camera connected to the
printer.
• The format of the paper
loaded is not the format A4
required to print the ink
cartridge alignment sheet
after replacing these.
• Jamming of the paper.
Corrective Action
• Clean the ink cartridges. See
"Cleaning the Ink Cartridge
Nozzles".
• Align the ink cartridges from
your computer. See
"Aligning the Ink Cartridges
From the Toolbox".
Corrective Action
• Turn off the printer and then
turn it back on again by
pressing the On/Off button.
• Clean the ink cartridges. See
"Cleaning the Ink Cartridge
Nozzles".
• Contact the field engineering
service.
Corrective Action
• Load paper. See"Loading of
the paper".
• Load the correct format.
See "Loading of thepaper".
• Load the correct format.
See "Loading of thepaper".
• Remove the jammed paper.
See "Elimination of paper
jams ".
MAINTENANCE AND TROUBLESHOOTING 45