Restoring The Base To The Default Settings; Checking The Base's Mac Address; Changing The Default Connection - Siemens Gigaset DX800A User Manual

Restoring the base to the
default settings
The individual settings are reset.
When the settings are restored:
u
Handsets are still registered
u
The system PIN is not reset.
The following settings in particular are reset
to the default settings (you can make the
settings marked "*)" via the Web configura-
tor):
u
The entered ISDN MSNs and VoIP connec-
tions (are deleted)
u
The assignment of send and receive con-
nections
u
Settings for the ringer melodies and vol-
ume levels
u
Settings for wake-up calls and appoint-
ments
u
Audio settings for VoIP connections *)
u
DTMF settings *)
u
Own area code
u
Settings for the local network
u
The names of the handsets
u
SMS settings (e.g., SMS service centres,)
u
Eco Mode and Eco Mode+ are deacti-
vated
u
PABX connection settings
u
Answering machine settings and per-
sonal announcements are deleted
u
Function and display key assignments as
well as key
u
Settings for network services: call divert,
call transfer (ECT)
The following lists are deleted:
u
SMS lists
u
Call lists
u
Answering machine lists
¢ Ï ¢
v
System
~
Enter the system PIN and
§OK§
press
§Yes§
Press the display key.
¢
Reset
.
Configuring the system settings
After resetting, the base is restarted.
The installation wizard is launched
¢
( page 18).
Checking the base's MAC
address
Depending on your network configuration,
you may have to enter your base's MAC
address in your router's access control list,
for example. You can check the MAC address
on the base.
In idle status:
v
Open menu.
*#Q5# 2 Q
Press keys in sequence.
The MAC address is displayed.
§Back§
Return to idle status.
Changing the default
connection
You can connect your base to the Internet
(DSL connection) to make calls via VoIP and,
in addition, to a default telephone connec-
tion – the ISDN or analogue fixed line. Your
telephone automatically detects the net-
work to which it is connected and changes
its configuration accordingly.
Please note
Connect the phone to the telephone
connection first and only afterwards to
the power supply.
If you change the phone connection from
ISDN to the fixed line or vice versa, the fol-
lowing message is displayed:
Network Detection
Ð
Your telephony
connection has
changed
OK
141