Siemens Gigaset DX800A User Manual page 121

Connecting/using other devices
Please note
u
If you de-register an activated Blue-
tooth device, it may try to reconnect
as an "unregistered device".
u
If you de-register the activated
¢
mobile ( page
mobile from the list will be activated.
Entering/editing the name of a
Bluetooth device
¢
s (select entry)
Open the list
Either:
§Options§
Press the display key.
Rename Select and press
is activated, if necessary.
Or:
§View§
Press the display key.
§Edit§
Press the display key.
Then:
~
Enter/edit name.
§Save§
Press the display key.
The name is changed locally on the base. It is
not changed on the Bluetooth device.
Activating a registered mobile
You can register up to five mobiles via Blue-
tooth. However, only one mobile can con-
nect to the base: the activated mobile.
Activated means:
u
If the base is in Bluetooth mode, the
mobile can establish a Bluetooth connec-
tion with the base (e.g., in the event of an
incoming call).
u
The base establishes a connection with
this mobile when attempting to make a
call via a GSM connection.
Once registration is complete, the last
mobile to be registered is activated auto-
matically. The previously activated mobile is
deactivated.
You can activate any other mobile from the
list of known devices.
120
119), no other
§OK§
. Bluetooth
¢
s (select mobile)
Open list
§Options§
Press the display key.
Connect Mobile
Select and press
Bluetooth is activated on the base if it is not
already active. The base connects to the
mobile.
The selected mobile is activated. Its entry in
the list of known devices is marked with μ.
The previously activated mobile is deacti-
vated.
Display in the base's idle display
If a headset or Bluetooth mobile is con-
nected to the base, the corresponding icon
(ô, l) together with ò (= Bluetooth acti-
vated) is shown in the display header.
Rejecting/accepting an
unregistered Bluetooth device
If a Bluetooth device that is not registered in
the list of known devices tries to connect
with the base, you are prompted on the dis-
play to enter the PIN for the Bluetooth
device (bonding).
u
Reject
T
Briefly press the red end key.
u
Accept
~
Enter the PIN for the Bluetooth
device you want to accept and
§OK§
press
If you accept the device, you can use it
temporarily (i.e., as long as it is within
receiving range and Bluetooth is acti-
vated) or add it to the list of known
devices.
Following PIN confirmation:
¤
Press the display key
device to the list of known devices.
Or:
¤
Press the display key
temporarily.
§OK§
.
.
§Yes§
to add the
§No§
to use the device