Siemens Gigaset DX800A User Manual page 120

¤
If you press the display key
is not registered and the base returns to
the list of found devices.
¤
If you wish to replace a device in the list,
press the display key
istered (known) data devices and mobiles
is displayed.
¤
Select the device to be replaced and
press the display key
You will need to enter a PIN to register the
new device (see above).
If the new device fails to register, the list of
known devices will remain unchanged.
Adding a headset to the known
devices list
In the list of devices found:
q
Select headset.
§Options§
Press the display key.
Trust Device
Select and press
If the headset transfers the PIN 0000 (the PIN
usually set on a headset), the headset is
directly added to the list of known devices. A
previously registered headset is automati-
cally de-registered.
If the headset transfers a PIN other than
0000, you are asked to enter the PIN on the
base.
~
Enter the PIN and press
The device is saved in the list of known
devices.
Please note
u
The known devices list can only con-
tain one Bluetooth headset. If you
register a second headset, the first
one is deleted from the list.
u
A multi-service device can be regis-
tered as a headset and a data device.
§No§
, the device
§Yes§
. A list of the reg-
§OK§
.
§OK§
.
§OK§
.
Connecting/using other devices
Editing the list of known (trusted)
devices
Open list
¢
v ò Bluetooth
Known Devices
Select and press
The list of known devices is displayed.
The names in the list are accompanied by
icons with the following meanings:
Icon Meaning
ô
Bluetooth headset
õ
Bluetooth data device
l
Bluetooth mobile
When a Bluetooth device is registered, all
Bluetooth profiles supported by this device
are saved (not just the profile that was
searched for).
This means, for example, that a registered
mobile can be saved as a data device and a
mobile in the list of known devices. Its name
is preceded by two icons: l and õ. You can
therefore use this Bluetooth connection to
access the mobile's GSM line and also to
exchange vCards with the mobile. The nego-
tiated PIN is valid for all types of Bluetooth
communication.
Viewing entries
¢
s (select entry)
Open the list
§View§
Press the display key.
The device name and address are displayed.
§OK§
Go back with .
De-registering Bluetooth devices
¢
s (select entry)
Open the list
§Options§
Press the display key.
Delete Entry
Select and press
Bluetooth is activated, if neces-
sary.
§OK§
.
§OK§
.
119