Ending A Call; Accepting A Call; Handsfree Talking; Muting - Siemens Gigaset SL37H User Manual

Ending a call

a
Press the end call key.

Accepting a call

The handset indicates an incoming call in
three ways: by ringing, by a display on the
screen and by the flashing handsfree key
d. If necessary, press the
key to show the number or name of the
caller.
You can accept the call by:
¤
Pressing the talk key c.
¤
Pressing the handsfree key d.
If the handset is in the charging cradle and
the Auto Answer function is activated
(page 20), the handset will take a call
automatically when you lift it out of the
cradle. Please note that to display the
phone number or name of the caller, the
display key may need to be pressed
§CLIP§
before the call is accepted.
If the ringer tone is intrusive, press the
display key. You can take the call as
§Silence§
long as it is displayed on the screen.
Accepting a call on a Bluetooth headset
Precondition: Bluetooth is activated; a
connection has been established between
the Bluetooth headset and the handset
(see page 26).
Only press the talk key on the headset
when the headset itself rings; it may take
up to 5 seconds to establish a connection
to the handset.
For further details on your headset, see
the user guide issued with it.

Handsfree talking

In handsfree mode, instead of holding the
handset to your ear you can put it down,
for example on the table in front of you, to
allow others to participate in the call.
Activating/deactivating handsfree
mode
Activating while dialling
~ d
¤
display
§CLIP§
Switching between earpiece and
handsfree mode
d
Switch handsfree on or off during a call.
If you wish to place the handset in the
charging cradle during a call:
¤
For how to adjust the handsfree volume
see page 20.

Muting

You can deactivate the microphone in
your handset during an external call.
The other party hears hold music.
u
"

Making internal calls

Internal calls to other handsets registered
to the same base station are free.
Calling a specific handset
u
~
Or:
u
s
c
Enter the number and press
the handsfree key.
You should inform your caller before
you use the handsfree function so that
they know someone else is listening.
Press the handsfree key.
Press and hold the handsfree key d
while placing the handset in the base
station. If the handsfree key d does
not light up, press the key again.
Press the control key on the
left to mute the handset.
Press the display key to reacti-
vate the microphone.
Initiate internal call.
Enter the number of the hand-
set.
Initiate internal call.
Select handset.
Press the talk key.
First steps
11