Service (Customer Care); Authorisation - Siemens Gigaset SL37H User Manual

Table of Contents

Advertisement

The display is blank.
1. The handset is not switched on.
¥
Press and hold the end call key
2. The battery pack is flat.
¥
Charge/replace the battery pack
(page 6).
The keys of a handset do not respond when
pressed.
The keypad lock is activated.
¥
Press and hold the hash key
"Base station x" flashes on the display.
1. The handset is outside the range of the base
station.
¥
Move the handset closer to the base sta-
tion.
2. The handset has been de-registered.
¥
Register the handset (page 7).
3. The base station is not switched on.
¥
Check the base station mains adapter.
Base Search flashes in the display.
The handset is set to
Best Base
tion is switched on or within range.
¥
Move the handset closer to the base station.
¥
Check the base station mains adapter.
Handset does not ring.
The ringer tone is switched off.
¥
Activate the ringer tone (page 21).
The other party cannot hear you.
You have pressed the
set is "muted".
¥
Switch on the microphone again (page 11).
You hear an error tone when keying an input
(a descending tone sequence).
Action has failed/invalid input.
¥
Repeat the operation.
Watch the display and refer to the user
guide if necessary.

Service (Customer Care)

We offer you support that is fast and tai-
lored to your specific needs!
Our Online Support on the Internet can be
reached any time from anywhere.
a
.
#
(page 8).
and no base sta-
u
(INT) key. The hand-
www.gigaset.com/customercare
It provides you with 24/7 support for all
our products. It also provides a list of FAQs
and answers plus user guides and current
software updates (if available for the prod-
uct) for you to download.
You will also find frequently asked ques-
tions and answers in the appendix of this
user guide.
For fast and dependable assistance with
any repairs or guarantee/warranty claims,
contact our Service Centre.
Russia 8 (495) 228 1312
Please have your proof of purchase ready
when calling.
Replacement or repair services are not
offered in countries where our product is
not sold by authorised dealers.

Authorisation

This device is intended for use within the
European Economic Area and Switzerland.
If used in other countries, it must first be
approved nationally in the country in
question.
Replacement or repair services are not
offered in countries where our product is
not sold by authorised dealers.
We, Gigaset Communications GmbH *
Home and Office Communication Devices
GmbH & Co. KG, declare that this device
meets the essential requirements and
other relevant regulations laid down in
Directive 1999/5/EC.
A copy of the 1999/5/EC Declaration of
Conformity is available at this Internet
address:
www.gigaset.com/docs.
Certificate No POCC DE.
valid to 28.02.2010
First steps
.B00378
МЛ.05
29

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents