Setting Your Own Area Code; Restoring The Handset To The Factory Settings; Appendix; Care - Siemens Gigaset SL37H User Manual

First steps

Setting your own area code

In order to transfer phone numbers
between Bluetooth connections and
phone, it is essential that your area code
(international and local area code) is
stored on the phone.
Some of these numbers are already pre-
set.
¢ ¢
w Ð
Handset
Check that the (pre)set area code is cor-
rect.
¤
Change multiple line input:
q
Select/change input field.
r
Navigate in the input field.
X
If necessary, delete number:
press the display key.
~
Enter number.
Press the display key.
§Save§
Example:
Area Codes
International code:
00 - 7
Local area code:
0 - [ 495 ]
X
Save
Restoring the handset to the
factory settings
You can reset any individual settings and
changes that you have made. Entries in
the directory, the call-by-call list, the call
history, the SMS lists (depending on the
base station) and the handset's registra-
tion to the base station as well as the con-
tent of My stuff are retained.
¢ ¢
w Ð
Handset
Press the display key.
Yes
a
Press and hold (idle status).
28
¢
Area Codes
¢
Reset Handset

Appendix

Care

Wipe the base station, charging cradle and
handset with a damp cloth (do not use
solvent) or an antistatic cloth.
Never use a dry cloth. This can cause
static.

Contact with liquid

If the handset has come into contact with
liquid:
1. Switch off the handset and remove
the battery pack immediately.
2. Allow the liquid to drain from the hand-
set.
3. Pat all parts dry, then place the handset
with the battery compartment open
and the keypad facing down in a dry,
warm place for at least 72 hours (not
in a microwave, oven etc.).
4. Do not switch on the handset again
until it is completely dry.
When it has fully dried out, you will nor-
mally be able to use it again.

Questions and answers

If you have any questions about using
your handset, visit us at any time at
www.gigaset.com/customercare. The
table below contains a list of common
problems and possible solutions.
Registration or connection problems with a
Bluetooth headset.
¥
Reset the Bluetooth headset (see the user
guide for your headset).
¥
Delete registration data from the handset
when de-registering the device
(see page 27).
¥
Repeat the registration process
(see page 26).
!