Opening Lists With The Message Key; Using A Handset As A Room Monitor - Siemens Gigaset SL37H User Manual

First steps
Managing entries in the last number
redial list
c
Press the key briefly.
s
Select entry.
Open menu.
§Options§
The following functions can be selected
with q:
Copy to Directory
Copy an entry to the directory
(page 12).
Automatic Redial
The selected number is automatically
dialled at fixed intervals (at least every
20 seconds). The handsfree key flashes
and "open listening" is activated.
– Party answers: press the talk
key c. The function is ended.
– Party does not answer: the call is ter-
minated after approx. 30 seconds.
The function is ended after pressing
any key or after ten unsuccessful
attempts.
(as in the directory,
Display Number
page 13)
Delete Entry (as in the directory, page 13)
Delete List (as in the directory, page 14)
Opening lists with the
message key
An advisory tone sounds as soon as a new
message arrives in a list. The message key
f flashes (it goes off when the key is
pressed). In idle status, the display shows
an icon for the new message.
If you press the message key f, you
access the lists that contain new mes-
sages.
16
Using a handset as a
room monitor
If the room monitor is activated, a previ-
ously stored destination number is called
as soon as a set noise level is reached. You
can store an internal or external number
in your handset as the destination
number.
The room monitor call to an external
number stops after around 90 seconds.
The room monitor call to an internal
number (handset) stops after approx.
3 minutes (depending on the base sta-
tion). While the room monitor is activated,
all keys are locked except the end call key.
The handset's speaker is muted.
When the room monitor is activated,
incoming calls to the handset are indi-
cated without a ringer tone and are only
shown on the screen. The display and key-
pad are not illuminated and advisory
tones are also turned off.
If you accept an incoming call, the room
monitor mode is suspended for the dura-
tion of the call, but the function remains
activated.
The room monitor mode is retained if you
turn the handset off and on again.
Caution!
– You should always check the operation
of the room monitor before use. For
example, test its sensitivity. Check the
connection if you are diverting the room
monitor to an outside number.
– When the function is switched on the hand-
set's operating time is severely reduced.
If necessary, place the handset in the
charging cradle. This ensures that the
batteries do not run down.
– Ideally the handset should be positioned 1
to 2 metres away from the baby. The micro-
phone must be directed towards the baby.
– The connection to which the room monitor
is diverted must not be blocked by an acti-
vated answer machine.