Labelling Input Sources; Skipping Hdmi/Pc Input; Colour System Settings - Sharp AQUOS LC-42D83M Operation Manual

Settings when using external devices

Labelling input sources

You can assign each input source a label as you
prefer.
A-TV D-TV RADIO
Press TV/VIDEO to select the desired input
1
source.
Press MENU and the MENU screen displays.
2
Press c / d to select "Setup".
3
Press a / b to select "Input Label", and then
4
press ENTER.
• When an HDMI input terminal (INPUT 4 to INPUT 6)
is selected, a Menu screen for selecting "Auto" or
"Manual" is displayed.
• When you select "Auto" using a / b , the Menu
screen returns to the "Input Label" Menu screen.
Press a / b to select characters and c / d
5
to move to the desired digit to label the input
source.
• When you want to change the input label that you
have already assigned to the default name, press
c / d to move to "CLEAR" on the "Input Label"
screen, and then press ENTER.
Repeat the above until the name is fully spelt
6
out, and then press MENU.
• The name can be 6 characters or less.
• When you want to set an input source name of
less than 6 characters, press MENU to exit from
the labelling menu.
A - TV
D - TV
INPUT1
INPUT2
INPUT3
INPUT4
INPUT5
DVD
NOTE
• You cannot change labels if the input source is A-TV or
D-TV.
50
FAV.
(Example)

Skipping HDMI/PC input

This setting allows you to skip the HDMI or PC input
on the Input Selection operation.
Press MENU and the MENU screen displays.
1
Press c / d to select "Setup".
2
Press a / b to select "Input Skip", and then
3
press ENTER.
Press a / b to select the Input (INPUT 4 to
4
INPUT 7) you wish to skip, and then press
ENTER.
INPUT 4 Select desired item
INPUT 5
INPUT 6
INPUT 7
Press a / b to select "Yes", and then press
5
ENTER.
Press MENU to exit.
6

Colour system settings

You can change the colour system to one that is
compatible with the image on the screen.
Press MENU and the MENU screen displays.
1
Press c / d to select "Option".
2
Press a / b to select "Colour System", and
3
then press ENTER.
Press a / b to select a compatible video signal
4
system of your equipment, and then press
ENTER.
Select desired item
AUTO
PAL
SECAM
NTSC 3.58
NTSC 4.43
PAL-60
NOTE
• Factory preset value is "AUTO".
• If "AUTO" is selected, colour system for each channel is
automatically set. If an image does not display clearly,
select another colour system (e.g. PAL, NTSC 4.43).
• "Colour System" is selectable only when inputting an
S-VIDEO or composite signal.
Yes
No