Selecting Programmes; Adjusting The Volume; Menu Language Settings - Sharp AQUOS LC-42D83M Operation Manual

Watching TV

Selecting programmes

You can change channels in several ways.
Using CH r / s on the remote control unit
• Press CH r to increase the channel number.
• Press CH s to decrease the channel number.
NOTE
• CH r / s on the TV operates the same as CH r / s on
the remote control unit.
Using 0 — 9 on the remote control unit
Select the channels directly by pressing buttons 0 to 9.
a
To select a 1-digit channel (e.g. channel 2):
• Press 0, followed by 2.
To select a 2-digit channel (e.g. channel 12):
• Press 1, followed by 2.
When viewing Teletext information
View a page directly which is 3-digit page number from
100 to 899 by pressing buttons 0 to 9.
Channel display
(Example)
SAT.1
A-TV
PAL
MONO
12
B/G

Adjusting the volume

Changing the volume
You can change the volume on the TV or on the
remote control unit.
• To increase the volume, press VOL k .
• To decrease the volume, press VOL l .
NOTE
• "A-TV", "D-TV", "INPUT1", "INPUT2", "INPUT3", "INPUT4",
"INPUT5", "INPUT6" and "INPUT7" (PC) modes can store
volume adjustment values separately.

Menu language settings

You can also select a language from setup menu.
Select from among 4 languages: English, Simplifi ed
Chinese, Traditional Chinese and Arabic.
Press MENU and the MENU screen displays.
1
Press c / d to select "Setup".
2
Press a / b to select "Language", and then
3
press ENTER.
Press a / b to select the desired language
4
listed on the screen, and then press ENTER.
NOTE
• In D-TV mode, Arabic language cannot be selected.
20
19