Selecting The Input Source And Signal Type; Selecting Input Source; Selecting Input Signal Type - Sharp AQUOS LC-42D83M Operation Manual

Settings when using external devices
Selecting the input source and
signal type

Selecting input source

Can use for selecting the input source.
Using TV/VIDEO on the remote control unit or on
the TV
TV/VIDEO allows you to choose from the available
input sources.
A-TV D-TV RADIO
Press TV/VIDEO on the remote control unit or
1
on the TV.
Press TV/VIDEO on the remote control unit or
2
on the TV to select the input source.
• The image and sound from the selected source
are output on the TV.
• You can also select the input source by pressing
a / b .
For setting the signal type of external equipment.
FAV.
• If no colour image displays, try changing the other
• Check the operation manual of the external equipment for
• When the signal type is set to "Auto", the input terminal
• When the signal type is set to "Auto" and multiple video

Selecting input signal type

Press MENU and the MENU screen displays.
1
Press c / d to select "Option".
2
Press a / b to select "Input Select", and then
3
press ENTER.
Press a / b to select a signal type you want to
4
set, and then press ENTER.
Input source
INPUT 1 Auto, COMPONENT, VIDEO
INPUT 2 Auto, COMPONENT, VIDEO
INPUT 3 Auto, S-VIDEO, VIDEO
NOTE
signal type.
the signal type.
where a cable is connected is automatically selected.
signal cables are connected, the signal type is selected in
the following prioritised order:
INPUT 1/INPUT 2: COMPONENT s VIDEO
INPUT 3: S-VIDEO s VIDEO
Selectable item
49