Timer And Sleep Operation (Remote Control Only); Timer Playback - Sharp CP-BH250 Operation Manual

Timer and sleep operation (Remote control only)

Timer playback:

The unit turns on and plays the desired source (CD,
TUNER, USB, AUDIO IN) at a preset time.
This unit has 2 types of timer: ONCE TIMER and DAILY
TIMER.
Once timer (" " indicator):
Once timer play works for one time only at a preset time.
Daily timer ("DAILY" indicator):
Daily timer play works at the same preset time every day
that we set. For example, set the timer as a wake-up call
every morning.
Using the once timer and daily timer in combination:
For example, use the once timer to listen to a radio
program, and use the daily timer to wake up.
1
Set the daily and once timer (pages 17).
1 minute or more
Daily timer
Start Stop
■ Timer playback
Before setting timer:
● Check that the clock is set to the correct time. If it is not
set, you cannot use the timer function.
● For timer playback: Plug in USB or load disc to be
played.
Press the ON/STANDBY button to turn the power on.
1
Press the TIMER button.
2
Within 10 seconds, press the
3
to select "ONCE" or "DAILY", and press the ENTER
button.
Within 10 seconds, press the
4
to select "TIMER SET", and press the ENTER button.
To select the timer playback source (CD, TUNER,
5
USB, AUDIO IN), press the
Press the ENTER button.
When you select the tuner, select a station by press-
ing the
or
ENTER button. If a station has not been programmed,
"NO PRESET" will be displayed and timer setting will
be canceled. To memorize a station, refer 'Memorizing
a station' on page 15.
To adjust the day, press the
6
and then press the ENTER button.
Press the
7
or
and then press the ENTER button.
To adjust the minutes, press the
8
button and then press the ENTER button.
Set the time to finish as in steps 7 and 8 above.
9
Adjust the volume using the VOLUME control, and then
10
press the ENTER button.
Press the ON/STANDBY button to enter the power
11
standby mode. "TIMER" indicator lights up.
TIMER
When the preset time is reached, playback will start. The
12
volume will increase gradually until it reaches the preset
Once timer
Start Stop
button
or
button
or
button.
or
button, and then press the
button
or
button to adjust the hour,
or
TIMER
REMOTE
SENSOR
volume. The timer indicator will blink during timer playback.
When the timer end time is reached, the system will
13
enter the power standby mode automatically.
Once timer:
The timer will be canceled.
Daily timer:
The timer operates at the same time every selected
day. Cancel the daily timer when it is not in use.
Notes:
● When performing timer playback using another unit
connected to the USB terminal or AUDIO IN jack, se-
lect "USB" or "AUDIO IN" in step 5. This unit will turn on
or enter the power standby mode automatically. How-
ever, the connected unit will not turn on or off.
● To stop the timer playback, follow step "Cancelling
the timer setting" of this page.
Checking the timer setting:
Turn the power on. Press the TIMER button.
1
Within 10 seconds, press the
2
to select "ONCE" or "DAILY", and press the ENTER
button.
Within 10 seconds, press the
3
to select "TIMER CALL", and press the ENTER button.
Cancelling the timer setting:
Turn the power on. Press the TIMER button.
1
Within 10 seconds, press the
2
ton to select "ONCE" or "DAILY", and press the ENTER
button.
Within 10 seconds, press the
3
to select "TIMER OFF", and press the ENTER button.
Timer will be canceled (the setting will not be canceled).
Reusing the memorized timer setting:
The timer setting will be memorized once it is entered. To
reuse the same setting, perform the following operations.
Turn the power on. Press the TIMER button.
1
Within 10 seconds, press the
2
to select "ONCE" or "DAILY", and press the ENTER
button.
Within 10 seconds, press the
3
to select "TIMER ON" , and press the ENTER button.
Press the ON/STANDBY button to enter the power
4
standby mode.
■ Sleep operation
The main unit can be turned off automatically.
Play back the desired sound source.
1
Press the SLEEP button.
2
Within 5 seconds, press the SLEEP button repeatedly
3
to select the time.
"SLEEP 90"
"SLEEP" indicator will appear.
4
The unit will enter the power standby mode
5
automatically after the preset time has elapsed. The
volume will be turned down 1 minute before the sleep
operation finishes.
To confirm the remaining sleep time:
While "SLEEP" is indicated, press the SLEEP button.
1
To cancel the sleep operation:
Press the ON/STANDBY button while "SLEEP" is indicated.
To cancel the sleep operation without setting the unit to the
standby mode, proceed as follows.
While "SLEEP" is indicated, press the SLEEP button.
1
Within 5 seconds, press the SLEEP button repeatedly
2
until "SLEEP OFF" appears.
E-17
or
or
or
or
or
or
"SLEEP 80" ... "SLEEP 10"
"SLEEP OFF"
button
button
but-
button
button
button