Recording On A Cassette Tape - Sharp XL-MP40H Operation Manual

Recording on a cassette tape (continued)
XL-MP40H
ENGLISH
To perform programmed recording:
1 Programme tracks (see page 14).
2 Press the button.
3 Press the ( ) button to start recording.
To stop recording:
Press the button.
Note:
If you use the remote control, make sure to press the SHIFT button
prior to pressing the button.
! Recording from the radio
1
Tune in to the desired station (see page 15).
2
Load a cassette into the cassette compartment with the
side to be recorded on facing you.
Wind past the leader of the tape, on which recording cannot be
performed.
3
Press the button.
Recording will be paused.
4
Press the ( ) button to start recording.
To stop recording:
Press the button.
To interrupt recording:
Press the button.
To resume recording, press the
E-19
Beat cancel
A whistling noise may occur when recording an AM station. Elimi-
nate the noise as follows:
1 Press the
2 Press the
better reception.
Notes:
" If you hear a whistling noise whilst recording an AM station, move
the AM loop aerial.
" If you use the remote control, make sure to press the SHIFT but-
ton prior to pressing the
! Erasing recorded tapes
1 Load the tape to be erased into the cassette compartment with
the side to be erased facing toward you.
2 Press the FUNCTION button until "TAPE" appears on the dis-
play.
When operating with the remote control, press the TAPE button.
3 Press the
4 Press the
Note:
If you use the remote control, make sure to press the SHIFT button
prior to pressing the
( ) button.
05/1/14
button to pause recording.
button and select "TP REC A" or "TP REC B" for
button.
button.
( ) button to start erasing.
button.
XL-MP40H(H)E2.fm
TINSZA040SJZZ