Table of Contents
Advertisement
Listening to a cassette tape
CD-MPX100E
(TAPE 1 or TAPE 2)
Various tape functions
n
Remote
Function
Main Unit
Control
Playback
Stop
Fast
forward/
Rewind
(TAPE 2
only)
Caution:
l To remove the cassette, press the
compartment.
l Before changing from one tape operation to another, press the
button.
l If a power failure occurs during tape operation, the tape head will
remain engaged with the tape and the cassette door will not open.
In this case, wait until the power is restored.
24
Recording on a cassette tape
(continued)
Before recording:
l When recording important selections, make a preliminary test to
ensure that the desired material is properly recorded.
l SHARP is not liable for damage or loss of your recording arising
Operation
from malfunction of this unit.
l The volume and sound controls can be adjusted with no effect on
the recorded signal (Variable Sound Monitor).
l For recording, use only normal tapes. Do not use metal or
Press in the stop mode.
CrO tapes.
l Recording can be operated in the TAPE 2 compartment only. The
TAPE 1 compartment is for playback only.
Erase-prevention tab of cassette tapes:
Press in the playback
l When recording on a cassette tape,
mode.
make sure that the erase-prevention
tabs are not removed. Cassettes have
removable tabs that prevent accidental
recording or erasing.
l To protect the recorded sound, remove
the tab after recording. Cover the tab
Press in the playback or
hole with adhesive tape to record on the
stop mode.
tape without the tab.
button, and then open the
10/3/05
Side A
Tab for
Tab for
side B
side A
MPX100EE_1.fm
TINSEA093AWZZ
Advertisement
Table of Contents
