Sharp XL-MP40H Operation Manual page 17

1
Press the ON/STAND-BY button to turn the power on.
2
Press the FUNCTION button until "CD DISC" appears on
the display.
When operating with the remote control, press the CD button.
3
Press the CD EJECT button to open the disc compart-
14
ment.
4
Place the disc on the spindle, label
side up.
5
Close the disc compartment by firmly pushing the corner
marked "PUSH CLOSE".
[CD]
Total number Total playing
of tracks time
" Due to the structure of its disc information, it takes longer
(approximately 20 to 90 seconds) to read a CD-R/RW disc
recorded in the MP3 or WMA format than a normal CD.
6
To interrupt playback:
Main unit operation:
Press the
To resume playback from the same
point, press the
Remote control operation:
Press the
To resume playback from the same point, press the
To stop playback:
Press the
MP3 track indicator
[MP3]
To remove the disc:
Whilst in the stop mode, press the
Total number of tracks
Caution:
" Do not play discs with special shapes (heart or octagon shaped)
WMA track indicator
[WMA]
" If a disc is damaged, dirty, or loaded upside down, "NO DISC"
" Keep foreign objects out of the disc compartment.
Total number of tracks
" Subjecting the unit to shock or vibration may cause mistracking.
" When the unit is not being used, be sure to close the disc com-
" If TV or radio interference occurs during disc operation, move the
Press the ( ) button to start playback from track 1.
Disc play indicator
When the last track on the disc has finished playing, the unit will
stop automatically.
button.
button again.
button.
button.
CD EJECT button.
as it may cause malfunctions.
will appear on the display.
partment. If it is left open, the lens may be covered with dust and
the unit may not operate properly.
unit away from it.
05/1/14 XL-MP40H(H)E1.fm
XL-MP40H
ENGLISH
button.
8
E-10
TINSZA040SJZZ