Timer And Sleep Operation - Sharp XL-MP40H Operation Manual

Timer and sleep operation

This may be operated only with the remote control.
Timer playback:
The unit turns on and plays the desired source (disc, tuner, tape) at
a preset time.
Sleep operation:
The radio, disc or cassette tape can be turned off automatically.
Before setting timer:
1 Check that the clock is set to the correct time (refer to page 8).
2 Load a cassette or disc to be played.
! Timer playback
1
Press the ON/STAND-BY button to turn the power on.
2
Press the CD, TUNER (BAND) or TAPE button to select the
desired function.
When you selected the TUNER (BAND), tune in to the desired
station.
3
Adjust the volume using the VOLUME buttons.
Do not turn the volume up too high.
4
Press the SHIFT button and then the TIMER button. Within
6 seconds, press the SHIFT button and then the MEMORY
button.
5
Within 1 minute, press the PRESET (
specify the hour to start, then press the SHIFT button and
then the MEMORY button.
6
Within 1 minute, press the PRESET (
specify the minutes to start, then press the SHIFT button
and then the MEMORY button.
" The timer playback starting time, function, and volume will be
displayed, and then the unit will enter the stand-by mode au-
tomatically.
" " " will appear and the current time will be displayed.
To cancel the timer playback:
Press the ON/STAND-BY button to turn the power on.
05/1/14 XL-MP40H(H)E2.fm
XL-MP40H
ENGLISH
or ) button to
or ) button to
Continued to the next page
E-20
TINSZA040SJZZ
8