Power Wheels B9784 Owner's Manual With Assembly Instructions page 23

45
PUSH
HERE
Seat Tab
• Fit the tab on the front of the seat into the slot near
the tank.
• Push down firmly near the back of the seat to "snap" it
to the vehicle.
Hint: You will need to remove the seat to access the
high speed connectors and to charge the 12 volt battery.
To remove the seat, press the tab at the back of the seat
and lift.
46
Tachometer
Cover
Tab
Notch
Tachometer
Housing
• Fit the tachometer cover onto the tachometer housing.
The tab on the tachometer cover should fit into the notch
in the tachometer housing.
• Insert a #8 x 3 / " screw into the tachometer cover
4
and tighten.
Seat Tab
Tank
Slot
Tachometer
Cover
Assembly
47
• Fit the tachometer to the fork cover.
• Insert two #8 x
and tighten.
48
Front
Fork Tabs
Handlebar
Fender
• Slide the fender onto the ends of the handlebars. Make
sure the pegs on the fender slide over the tabs on the
front fork.
23
Tachometer
Fork
Cover
3 / " screws into the tachometer
4
Front
Fork Tabs
Handlebar