Power Wheels B9784 Owner's Manual With Assembly Instructions page 21

40
.354 (Small Diameter)
Front Fork Assembly
.354 Cap Nut
• Slide the fork axle up through the bottom of the front
fork, through the frame neck and steering stop, and out
the top of the front fork.
• Fit a .354 (small diameter) cap nut on the end of the
fork axle.
• Support the fork axle and tap the cap nut with a hammer
to secure it on the end of the axle.
Hint: You may need the help of another adult to hold the
front axle in place while you secure the cap nut.
• Pull on the .354 cap nut to make sure it is secure on the
fork axle.
Cap Nut
Fork Axle
.354"
Assembly
41
• Insert the handlebar harness into
the wire clip on the side of the
vehicle body.
21
Handlebar
Harness
Wire
Clip
See
Inset
Handlebar
Harness
Wire
Clip