Table of Contents
Advertisement
21
• Position the vehicle frame so that the front faces you.
• Fit a steering bushing underneath the neck of the
vehicle frame.
• Insert a #8 x
3
/
" screw into each end of the steering
4
bushing and tighten.
22
Headlight
Lens
Headlight
Housing
• Fit the headlight lens onto the headlight housing.
3
• Insert three #8 x
/
" screws into the headlight lens
4
and tighten.
Assembly
23
Vehicle
Frame
Neck
Steering
Bushing
Front View
• Fit the front fork into the front fork cover.
• Insert two #8 x
front fork and tighten.
24
Front Fork
Assembly
• Position the headlight assembly with the lens down on a
flat surface.
• Fit the front fork assembly onto the back of the headlight
assembly, as shown.
• Insert two #8 x
the front fork assembly and into the headlight assembly.
• Tighten the screws.
16
Front Fork
Lower Hole
Front Fork
Cover
1
/
" screws into the lower holes in the
2
Headlight
Assembly
3
/
" screws through the center holes in
4
Lower
Hole
Center
Holes
Advertisement
Table of Contents
