AT&T 945 User Manual page 24

984CIB_(Rev9)ml_24.05.06
Wall installation
continued from page 17
2. Reverse the handset tab.
Hold down the switchhook, then pull out the handset tab and
rotate it 180 degrees. Push the handset tab down into the
grooves so it settles into position.
3. Connect the telephone line cords to the telephone as shown.
4. Connect the handset cord.
Plug one end of the coiled handset cord into the jack on the left side
of the phone. Plug the other end into the handset and hang up.
5. Connect the power adapter to the telephone.
Plug one end of the power adapter into the jack labeled POWER
on the back of the phone. Plug the power adapter into a standard
electrical outlet not controlled by a wall switch.
18
5/24/06 8:07 PM
Switchhook
Handset tab
L3/L4 jack L1/L2 jack
Use only the power adapter provided with this product.
To obtain a replacement, call
Power jack
Page 18
1 (800) 222–3111
Standard
electrical
outlet
Power adapter
.