Clarity Fortissimo User Manual page 45

I cannot dial the phone number edited in the caller list.
• The phone number you dialed might have been edited incorrectly. For example,
the long distance "1" or the area code is missing. Edit the phone number with
another pattern.
Time on the unit has shifted.
• Incorrect time information from incoming Caller ID changes the time. To correct,
reset the time and date using "System Setup" menu – "Set Time" – "Set Date".
The second caller's information is not displayed during an outside call.
• In order to use Caller ID, Call Waiting, or Call aiting Caller ID (CWID), you must first
contact your service provider and subscribe to the desired service.
• After subscribing, you may need to contact your service provider again to activate this
specific service, even if you already subscribed to both Caller ID and Call Waiting with
Caller ID services (CWID).
I cannot have a conversation using the headset.
• Your Bluetooth headset is not registered. Register it by pressing the "Menu" button
on the LCD screen. Then press the "Down" arrow button to scroll to "Register", then
select Register to complete the process.
• Turn your headset OFF, then turn it ON and try again.
Noise is heard during a call on the headset.
• A Bluetooth headset can communicate with the base unit within a range of approxi-
mately 33 feet. The connection may be subject to interference from obstructions such
as walls or electronic devices. Move closer to the base unit.
I cannot connect my headset to the base unit.
• Confirm that your headset is turned on.
• If your headset is already connected to another Bluetooth device such as your cellular
phone, disconnect the headset from your cellular phone, then perform the connecting
procedure from the base unit.
TROUBLESHOOTING
45