Yamaha MT4X User Manual page 48

Appendix
47
Specifications (continued)
Signal-to-Noise ratio (at nominal input and output)
Distortion (1 kHz at nominal input and output)
Equalizer
Recorder
Frequency Response
Signal-to-Noise ratio
Distortion
Channel separation
Erase rate
Noise reduction
General
Control jacks
Power requirements
Power consumption
Dimensions4 (WxHxD) 414.2 x 110.7 x 311.3 mm
Weight
Accessories
0 dB = 0.775 V rms
• Specifications are subject to change without notice.
• The dbx™ noise reduction system was manufactured based on a patent licence from
THAT Corporation. dbx is a trademark of Carillion Electronics Corporation.
68 dB / IHF-A
75 dB/IHF-A
0.1%/30kHz LPF
0.03%/30 kHz LPF
LOW
MID
HIGH
40 Hz to 18 kHz,±3 dB (Tape speed - 9.5 cm/sec, dbx™ NR - OFF)
85 dB / IHF-A (at 3% distortion level, dbx™ NR - ON)
2.0% (400 Hz, -10 dB record level)
70 dB (1 kHz, -10 dB level, BPF, dbx™ NR - ON)
55 dB (1 kHz, 0 dB record level, dbx™ NR - OFF)
dbx™
PUNCH I/O (FC5)
US and Canada
General
19 W
4.4 kg
AC power cord
MIC IN - STEREO OUT (GAIN control
MAX)
LINE IN - STEREO OUT (GAIN control
MDM)
MIC IN - STEREO OUT (GAIN control
MAX)
LINE IN - STEREO OUT (GAIN control
MIN)
±12 dB at 80 Hz - Shelving
±12 dB at 1 kHz - Peaking
±12 dB at 12 kHz - Shelving
120 V AC, 60 Hz
230 V AC, 50 Hz
User's Guide