Yamaha MT4X User Manual page 44

43 Memory Functions
Confirm the tape position
1) Press and hold the CHECK key.
2) Press the REC SELECT key
The maximum level segment of the selected track will light and the tape counter
will display the corresponding location value for as long as the two keys are
pressed. If the level is beyond the recommended level, the segment will flash.
The following display shows Track 2 being checked.
Note: If the maximum level is reached a several locations, only the first location is
displayed.
If you reset the tape counter after the recording, the location displayed will be
incorrect. Unlike the memo function, the MT4X does not re-calculate the maximum
level memory locations.
Clear the maximum level data
1) Press and hold the STOP key
2) Press the CLEAR key
When the data is cleared, the -20 dB segments on the level meters for all four tracks
and the stereo signal will flash three times.
Note: The maximum recording level data is NOT cleared automatically. Before each
recording, you should reset the stored levels. Otherwise you could mistake the levels of a
previous recording for the current recording.
corresponding to the track you want to check.
User's Guide