Table of Contents
Advertisement
33
Recording Functions
Rehearsal
5)
Press the PLAY key to start playback.
6)
Adjust the channel levels with the channel faders. Set the equalization with the
HIGH, MID, and LOW equalizer controls
position. Set the aux send level with the AUX SEND controls
auxiliary return levels with the LEVEL controls
Set the levels and other parameters of any connected signal processing equipment.
Adjust the record levels on the master recorder.
7)
When you are satisfied with the levels, press the RETURN TO ZERO key to stop the
rehearsal and rewind the tape.
Recording
8)
Insert a tape into the master recorder.
9)
Start recording on the master recorder. Press the PLAY key on the MT4X to start
playback.
Note: You may want to remove any count-ins before you create your master tape. There
are several ways of doing this. One method is to switch (input select key) the track that
contains the count-in to the MIC/LINE position until the count is completed and then
switch it to the TAPE. Another method is to set the MT4X to start playback after the
count-in. Use the method that you find most comfortable.
Check the recording
10)
When the recording is finished, rewind the master recorder and play back the tape.
Tip: You can add a synchronized MIDI part to your mix. See "Synchronized mixdown"
on page 39.
Use the Pan control to adjust the pan
Adjust the
User's Guide
Hide quick links:
Advertisement
Table of Contents
