Yamaha MT4X User Manual page 27

Status indicators
During the operation of the automatic punch-in/out function, you can determine the
status by checking the indicators shown in the following table:
Function
Mark the pre-roll point
(see step 3).
Start the tape playing (see
step 4). If you press the
AUTO PUNCH I/O key
while the tape is playing,
the operation starts here.
Mark the punch-in point
(see step 5).
Mark the punch-out point
(see step 6).
The tape is rewound,
waiting for rehearsal (also
see step 6).
Rehearsal mode (see step
8).
The tape is rewound,
ready for recording (see
step 9).
Recording mode (see step
10).
While the tape is
rewinding, the Play LED
flashes the waiting
pattern.
User's Guide
Recording Functions
Display Indicators
26
LEDs