Memory Functions; Memo Function - Yamaha MT4X User Manual

41

Memory Functions

5 Memory Functions

Memo Function

Store a memory location
You can mark two memory locations which can be used to quickly return to a specific
point on your tape.
1) Fast-wind or rewind the tape to the location you want stored.
For example, you can locate the end of a track just by stopping the tape.
2) Press the MEMO-1 or MEMO-2 key
The corresponding MEMO indicator
Check the memory locations
1) Press and hold the CHECK key
2) Press the appropriate MEMO key.
The tape counter
number portion to the MEMO indicator will flash for as long as the two Keys are
pressed.
The following display shows the MEMO-2 location being checked.
Locate to a stored location
1) Press the appropriate LOCATE key
The MT4X will fast-wind or rewind the tape to the stored location. While the tape is
in motion, the number portion of the MEMO indicator will flash.
The following display shows the results of pressing the LOCATE-2 key.
Note: The locate interval must be more than three counts on the tape counter.
If you reset the tape counter, the MT4X will re-calculate the stored memory
locations. When you check a memory location, the value displayed will reflect the
reset tape counter. When you locate to a memory location, the MT4X will fast-wind
or rewind to the correct location.
will flash three times and then light.
will display the corresponding memory point value. The
User's Guide