Play Audio Track - Teac Pico-1 User Manual

Cd copy station

Table of Contents

3.5 Play Audio Track

Since it is impossible to make a bit-by-bit comparison of audio CDs,

this function is provided for you to „audition" a CD copy. Plug audio

equipment like an amplifier to the audio connectors at the rear of the

Pico-1. Insert the CD to test into the master drive.

Press the MODE key until the display shows the following:

Press ENTER.

After the ENTER key has been pressed, a Please wait ...

message is briefly shown and track 1 will start playing.

Pressing ENTER again will jump to the next track and start play-

back. If the last track is reached in this mode, and the ENTER key

is pressed, playback will start at the first track.

f the MODE key is pressed while e.g. the fifth track is played the

following is displayed:

Pressing the ENTER key will start playing the track before the cur-

rent track. If the first track is currently being played, and the EN-

TER key is pressed, the last track will start playing.

3. Modes

Mode select

4 Play audio

Track 01 Play

1 Next track

Track 05 Play

2 Previous track

Please wait ...

Table of Contents