Modes; Disc Copy - Teac Pico-1 User Manual

Cd copy station

Table of Contents

3. MODES

The different modes available are:

– Copy

– Test write

– Compare CD-ROM

– Play audio

– Write speed selection

– Individually Arranging an Audio CD

These are accessed by pressing the MODE key. Details of these modes

are given below.

When the required mode is shown on the top line of the display press

the ENTER key to enter the mode. When the word Exit

the display, the ENTER key will halt the current operation.

NOTE

You should own the copyright, or have obtained the appropri-

ate permission from the copyright owner or the rightful licen-

sor, your unauthorized recording, reproduction or distribution

thereof, may result in severe civil and criminal penalties under

This procedure copies the material from the disc (either an audio CD

or a CD-ROM) in the MASTER drive to the CD-R/CD-RW in the SLAVE

drive. You may find it useful to test the copy procedure before commit-

ting yourself to an actual copy, however. See

details.

NOTES

Once a copy operation has started, it cannot be stopped be-

fore the disc has been finalized. The only way to stop a copy

operation is to turn off the power to the unit. However, this will

make the CD-R/CD-RW disc useless for any purpose. Do not

use warped discs or discs with off-center holes with the Pico-

1. While the copy operation is in progress, make sure that the

Pico-1 is not subjected to vibration or mechanical shocks.

3. Modes

Exit appears on

Exit

3.2, „Test Write Mode"

for

Table of Contents